|
|
Ernie
Gutierrez (Ginacue)
Gorgeous Ginacue in perfect condition
– not sure of the model but this cue has 6 snakewood prongs going up and
down, accented by red veneers and red dot clovers at the tips of the
points – Ernie’s patented rainbow work between the points, featuring
ivory with colored veneer accents – this cue also features ivory stitch
ring work with colored veneer slots above and below the wrap – piloted
ivory joint (5/16-18 with a stainless steel pin) and double silver trim
rings in the collars – Ernie’s traditional black leather wrap – this cue
was recently acquired out of a collection and is in like new condition
(99%+ condition) – strikingly beautiful snakewood into ebony Ginacue and
the red veneers really make this one pop
 
2 shafts (13.0mm) with ivory ferrules
58"
and weighs 19.0oz (14.9 and 4.1, 4.0)
no longer available
|
Andy
Gilbert
One of a kind Brunswick
Titlist conversion – 4 Macassar ebony points with Titlist veneers into
straight grain maple – Macassar ebony butt sleeve with Rambo style butt,
bumperless with a polished weight bolt, featuring an ivory Hoppe ring
with short black linen butt plate – Hoppe ring is accented by thin black
and silver trim rings – piloted ivory “short joint” (5/16-14 with a
stainless steel pin and ivory tip ala Schick) – alternating ivory and
silver box ring work with thin silver trim rings in the collars –
finished off perfectly with a black elephant ear wrap – this cue was
recently completed and is in brand new unplayed condition (100%)
 
2 shafts (13.0mm) with LBM ferrules
58" and weighs 19.3oz (15.1 and 4.2, 4.2)
no longer available
|
Andy
Gilbert
Monster semi-traditional 4
pointer – 4 ebony points with multiple veneers of maroon and thin black
and white paper accent veneers into bird’s eye maple, each point with a
modified scrimmed peacock inlay and small silver dot – ebony butt sleeve
with 4 large engraved ivory windows bordered by maroon veneers and ivory
outlined abalone dots at the corners – also in between are long barbells
consisting of thin ivory lines with maroon veneers inside, with slightly
larger ivory outlined abalone dots on the ends – flat face ivory “short
joint” (3/8-10 with a stainless steel pin and ivory tip ala Schick) –
white/black box dash rings bordered by thin silver at A, B, D, and E –
this cue also features a unique ring above the wrap, solid ivory sleeve
with inlaid abalone dots sandwiched inside thin silver and black rings –
alternating ivory and silver box ring work with thin silver trim rings in
the collars – white delrin butt cap – nice pitted black boar’s hide wrap
– this gorgeous cue was delivered to us at the Derby City Classic last
year (2008) and has been in a collection since then, it is in like new
condition (98%)
 
2 shafts (13.0mm) with LBM ferrules
58" and weighs 19.7oz (15.7 and 4.0, 4.0)
PRICE – $3850
|
Andy
Gilbert
Here is an opportunity to pick
up a nice jump/break – nicely figured tulipwood into light bird’s eye
maple – double reinforced at the jump joint – 3/8-10 stainless pins at
both connections – white/black box dash rings bordered by thin silver at
A, B, and E – black phenolic joint collars and butt cap – Andy’s
traditional style jump/break – they’ve been pretty hard to get the last
few years – this one was made earlier this year and is in excellent
condition, light test play only, finish is a little wavy in the forearm
where it’s sunk in a little over the bird’s eyes – overall would rate this cue about 95%, a few
dings but overall very nice and clean
 
1 shaft (13.0mm) with LBM ferrule
58" and weighs 19.7oz (15.9 and 3.8)
no longer available
|
Jerry
Olivier
Nice plain-jane player with
some options – tulipwood forearm and butt sleeve with cocobolo sleeved
flat face joint (3/8-10 with a stainless steel pin) – single brass trim
ring in joint collars –cocobolo rings accented on two sides with thin
brass at C, D, and E – black phenolic butt cap –finished off perfectly
with a nice brown lizard print leather wrap that ties in nicely with the
cocobolo accents – this cue was completed earlier this year and is in
like new condition, with some test hits only (99%+) – two different
brands of layered tips (appear to be Moori and something else)
 
2 shafts (13.0 and 12.75mm) with LBM ferrules
58" and weighs 19.4oz (15.6 and 3.8, 3.7)
PRICE – $825 (new price $750)
|
**Also,
please refer to our main Menu
page for other listings.
|
|
